Carpentry

How to Measure for a Built In Wardrobe in Abu Dhabi

ALHUD Technical LLC 12 November 2026 5 min read
Same-Day Service Abu Dhabi
Licensed & Certified
Free Quote
All Work Warranted
Quick Answer

To measure for a built in wardrobe, record the width at the top, middle and bottom of the wall, the height at both ends and the middle, and the depth. Note sockets, switches, AC units, windows and skirting. Use the smallest figure for each measurement and share photos with the carpenter.

AH
Written & technically reviewed by ALHUD Technical LLC Licensed AC, electrical & facility maintenance company serving Abu Dhabi since 2017.
Walk-in closet with a mirror and a stool, showing a dressing area layout

Why Measuring Matters

A wardrobe that is a few millimetres too wide will not fit, and one that is too narrow leaves gaps that collect dust. Accurate measurements are the cheapest way to avoid a costly redo. Spend ten minutes on this before you talk about finishes or handles.

Abu Dhabi homes often have walls that look straight but are not, especially in older villas and in rooms where plaster or tiles were added later. The measuring steps below help you catch those differences.

What You Need Before You Start

  • A steel tape measure, not a cloth one
  • A spirit level or a level app on your phone
  • A pencil and paper or a notes app
  • A phone camera for wide and close up photos
  • A second person to hold the end of the tape

Step by Step: The Basic Measurements

Measure the width of the wall space at three heights: near the floor, at waist height and near the ceiling. Write down all three and use the smallest number as your working width.

Measure the height from floor to ceiling at the left end, the middle and the right end. A ceiling that slopes or dips changes how the top of the wardrobe is fitted.

Measure the depth from the back wall to the front edge you want. Standard hanging depth is often around 60 centimetres, but shallow rooms may need less and sliding doors need extra track space.

Mark the position of sockets, switches, AC units, vents, windows and skirting. These points affect the layout and sometimes the door swing.

Obstacles and Details People Forget

  • Skirting boards: decide whether the wardrobe sits in front of them or the boards are removed
  • Cornices and ceiling mouldings that stop the wardrobe reaching the ceiling
  • Door and window architraves that reduce usable width
  • AC pipework, vents and ducts running along the wall
  • Sockets that must stay reachable or be moved by an electrician

If the wardrobe will sit beside a door, measure the door swing so the handle and the doors do not collide.

Share Your Measurements With Photos

Take one wide photo of the whole wall and a few close ups of corners, sockets and the ceiling line. Add your notes, and send everything to the carpenter. If you want us to check or measure on site, our custom wardrobes service starts with a measurement visit before the design and quote.

Modern walk-in closet with organised clothing and shelves

Check Building Rules Before the Work Starts

Apartments and community villas often have rules on work hours, noise, lift booking and approvals. Ask your building management early, and keep a copy of any permit. Rented homes may also need landlord approval before fixed furniture is added.

Common Measuring Mistakes

  • Measuring once at one height and trusting it
  • Forgetting to subtract space for skirting or trims
  • Measuring over a rug or temporary floor covering
  • Ignoring the swing of a nearby door
  • Rounding up instead of recording the exact figure

Each of these mistakes is easy to avoid with a second check. If two measurements of the same wall differ, note both and tell the carpenter, because the difference tells us something about the wall.

Plan the Inside While You Measure

While you stand in the room, think about what the wardrobe will hold. Long hanging space is needed for dresses and abayas, double rails suit shirts, and drawers suit folded clothes. Count how many pairs of shoes, bags and boxes need a home, and note any items that are unusually long or tall. These details shape the layout far more than the finish does.

It also helps to measure your tallest hanging item. Many people are surprised how much height a full length garment needs, and the carpenter can then place the rail and shelves with real numbers.

A Quick Final Check

  • Did you measure width and height in three places?
  • Did you note the smallest figures?
  • Are sockets, AC and skirting recorded?
  • Have you taken photos of the wall, corners and ceiling?
  • Do you know your building rules for work?

If you can answer yes to all five, you are ready to talk design. Tell the carpenter how you use storage, and the layout can follow from that.

Frequently Asked Questions

What tools do I need to measure for a wardrobe?

A steel tape measure, a spirit level, a pencil, paper and a phone for photos are enough. A second person helps hold the tape straight.

Why do I measure the wall in three places?

Walls and floors are rarely perfectly straight. Measuring at several points shows where the space narrows, so the wardrobe is built to the smallest figure.

Should I measure before or after the new floor goes in?

After, if possible. Flooring changes the finished floor height, which affects door clearance and the base of the wardrobe.

Can the carpenter measure for me?

Yes. A site visit is the most accurate option, and your own measurements help you plan the layout before the visit.

What if my ceiling is not level?

Tell the carpenter. A built in wardrobe can be scribed to follow the ceiling line, but this needs to be planned in the design.

Need help? Call or message ALHUD Technical LLC on +971 56 210 8748. We will arrange a visit and confirm the scope and price before work starts.

Wardrobe Measuring Abu Dhabi

Need This Sorted?

Serving all Abu Dhabi areas, same-day appointments available

+971 56 210 8748 WhatsApp Now