A water heater that does not heat is usually caused by a tripped breaker, a faulty thermostat, a failed heating element or scale build up. Check the power and settings first, and call a technician for any electrical or pressure problem.
Before assuming the heater has failed, check the simple things. Is the isolation switch on? Has the breaker tripped? Is the thermostat set to a sensible temperature? Many no hot water calls start with a tripped breaker or a switched off isolator. If the breaker trips again straight away, do not keep resetting it.
You can check the power switch, the breaker and the temperature setting. You can also see whether other taps give hot water, which helps decide whether the fault is the heater or the tap. Do not open covers, touch wiring or adjust the pressure valve. Water heaters mix electricity and hot water, so these jobs are for a qualified technician.
Scale builds up on elements and inside tanks, especially where water is hard. It insulates the element, makes the heater work longer and can lead to failure. The US Department of Energy also notes that heater settings and maintenance affect energy use. Regular servicing can reduce scale problems.
Water around the base can come from a pipe joint, a valve or the tank itself. A leaking tank cannot be repaired and usually means replacement. Switch off power and water supply to the heater and call a plumber right away. Our water heater repair team can inspect the unit and explain the options.
A technician can compare options after an inspection.
The type of heater affects which faults are likely, so tell the technician which one you have and roughly how old it is.
If the water is hot at first and then turns cold, the tank may be too small for the household, an element may have failed, or a dip tube may be damaged. Adding a second bathroom or more people to the home often shows up as a heater that suddenly feels weak. A technician can check capacity and the condition of the parts before you decide on a new unit.
Photos of the label and the heater help us prepare before the visit.
Common causes are a tripped breaker, a faulty thermostat, a failed heating element or heavy scale. A technician can test each part.
A worn element, a low thermostat setting or a heater that is too small for demand can produce lukewarm water.
No. Water heaters involve electricity and hot water under pressure. Switch off power and call a technician.
Many owners check them yearly. A technician can advise based on water quality and usage.
If the tank is leaking or badly corroded, replacement is usually safer. A part failure may be repairable.
Need help? Call or message ALHUD Technical LLC on +971 56 210 8748. We will arrange a visit and confirm the scope and price before work starts.
Serving all Abu Dhabi areas, same-day appointments available