TV Units and Wall Panels in Abu Dhabi
The TV wall is usually the main wall in a living room, and it often looks the worst: a black screen, a tangle of cables and a unit that does not match the room. A built-in TV unit with a wall panel fixes all three. ALHUD Technical LLC designs and builds custom TV units and feature walls for villas and apartments across Abu Dhabi, from a simple floating shelf to a full-wall media unit with lighting and storage.
Because the unit is made for your wall, the sizes work with your screen, your sound bar and your devices, and the finish ties in with your doors, floor and furniture.
Types of TV Unit and Wall Panel We Build
- Floating TV units with drawers or open shelves below the screen
- Full-wall media units with side storage, display shelves and a central recess
- Wall panels and feature walls in veneer, slats, fluted boards or painted panels
- Fireplace-style surrounds and recessed niches for ornaments
- Hidden-door units that conceal cables, a router or storage
- Bedroom TV units with a headboard or a dressing wall behind
Wall panels do more than decorate. They can hide wiring, soften echo and cover imperfect plaster or old sockets. If you want a lower ceiling detail above the unit, our false ceiling team can coordinate the ceiling and wall designs.
Sizing the Unit to the TV and the Room
Size is the first decision. A screen looks best when it sits at a comfortable eye level from where you actually sit, and the unit should frame it without competing with it. We ask the seating distance, the screen size and whether you will upgrade the TV later, and leave room for the next size up when you might change it.
Ventilation matters too. TVs, receivers and game consoles produce heat, and a closed cabinet traps it. We leave ventilation slots and, where necessary, a small gap or fan so equipment lasts longer. This is important in Abu Dhabi homes, where the summer ambient temperature is already high.
Hidden Cables, Sockets and Equipment
The neat look depends on what happens behind the panel. We plan cable routes before building: where the power sockets sit, where the HDMI and network cables run, and how to reach devices for maintenance. A removable back panel or access door means you can swap a cable without cutting the wall.
- Power sockets inside the unit for the TV and devices
- Cable channels or conduit from the TV to the equipment shelf
- Space for a sound bar, receiver, router or console
- Remote-friendly openings, so infrared remotes still work
- A service gap that allows safe access later
New sockets or data points need an electrician, and our electrical installation team can coordinate this with the carpentry so the wall is not opened twice.
Lighting for Feature Walls
Lighting changes how a media wall looks at night. Soft LED strips behind a panel or under floating shelves add depth, and a bias light behind the TV reduces eye strain when you watch in a dark room. We plan the lighting circuits early and keep drivers accessible. Our lighting installation page shows what the team can add.
Materials and Finishes
Finishes should suit the room and the climate. Veneered and painted boards are common, fluted and slatted panels add texture, and mirrored or stone-look panels can make a bolder statement. Dark finishes show dust and fingerprints more easily, so choose with cleaning in mind, since dust settles quickly in Abu Dhabi.
- Veneer: warm and natural, with a real wood face
- Paint or lacquer: clean and modern, easy to touch up
- Fluted or slatted panels: textured and good for hiding cable gaps
- Laminates: practical and budget-friendly
- Combined finishes: wood with a painted niche or a mirror strip
How a TV Unit and Wall Panel Job Works
- Site visit. We measure the wall, check the sockets, the ceiling height and the wall type, and agree what goes inside the unit.
- Design. You see a drawing with sizes, panels, storage and lighting, and we agree the finish and price.
- Preparation. Any wall repair, sockets or cable runs are planned and done before the panel goes up.
- Workshop build. Panels, shelves and cabinets are made and finished off site.
- Installation. The unit is fixed to the wall, the TV is mounted if required, and cables are tidied and tested.
- Handover. We check the doors, drawers, lighting and ventilation with you.
Wall type matters for fixing. Concrete, blockwork and gypsum walls each need different fixings, and heavier TVs need solid support. If your wall is a partition, our gypsum partition team can advise on reinforcing it.
Painting and Wall Finishing Around the Unit
The wall around the unit needs a clean finish. If the room is being refreshed, plan the carpentry and the paint together so the panel is installed on prepared walls and touched up afterwards. See our interior painting service for the wall and ceiling work.
What Affects the Cost of a TV Unit or Feature Wall
- The width and height of the wall and the unit
- The panel type, such as flat, fluted or veneered
- Storage, drawers and shelves
- Lighting and the electrical work involved
- Wall preparation and any ceiling coordination
- Access for materials and installation
We confirm the price after the site visit and drawing. Send photos of your living room and the TV size on WhatsApp and we can recommend a design before we visit.
Looking After a Media Wall
Dust the unit with a soft cloth, and keep vents clear. Avoid placing hot devices directly against panels, and check the cable access now and then. If a shelf sags or a door drops, ask for an adjustment early. Our guide to hiring a carpenter in Abu Dhabi explains what to expect from a professional.
Related Services
For matching storage and tables, see custom made furniture.
Browse the furniture and carpenter page for the full range.
Frequently Asked Questions
Can I mount my TV on the wall panel?
Yes. We design the panel with the fixing method for your TV and wall type, and we can mount the TV and tidy the cables when the unit is complete.
How do you hide the TV cables?
We plan cable channels and an equipment shelf behind or inside the unit, with sockets in the right place and an access panel for later changes.
Will my equipment overheat inside the unit?
We leave ventilation slots and gaps so heat can escape. Tell us about consoles and receivers so we plan enough airflow.
Can you add lighting to the TV wall?
Yes. LED strips behind panels, under shelves or in niches can be included, and we coordinate the wiring with an electrician.
Can the wall panel cover uneven walls?
A panel can hide plaster flaws and old sockets, but the structure still needs to be flat enough to fix to. We check on the visit and advise if wall preparation is needed.
How big should my TV unit be?
It depends on the screen size, the seating distance and the room. We usually leave room for the next size up so a future TV still fits.
Do you build TV units for bedrooms?
Yes. We build bedroom units with the TV recess, storage and a headboard wall to match the rest of the furniture.
How do I get a quote for a TV unit or wall panel?
Call +971 56 210 8748 or send photos and TV size on WhatsApp. We arrange a site visit and confirm the scope and price before work starts.