Split units suit single rooms, ducted systems suit whole villas, cassette units suit offices and shops, and package units suit larger spaces. Choose by room size, ceiling space, noise, appearance, running cost and where the outdoor unit can go.
People often start with the brand, the colour or the price. A better start is the type of system, because the type decides where units go, how pipes and ducts run, what the room looks like and how much it costs to run. ALHUD Technical LLC installs air conditioners in homes, offices and shops across Abu Dhabi, and many problems we fix later started with the wrong type choice or the wrong size.
This guide compares the main types, explains sizing and placement and lists what to check before you sign an installation quote.
A split system has an indoor unit on the wall and an outdoor unit connected by refrigerant pipes. It suits individual rooms, small flats and additions. It is simple, widely available and easy to service.
Pipe length, height difference and drain routing all matter. Check that the installer plans them before drilling.
Ducted systems use a central fan coil unit in a ceiling or plant space and a network of ducts that deliver air to many rooms through grilles. They give a tidy look, since only grilles are visible, and can cool large areas evenly.
Poor duct design is a common cause of hot and cold rooms. Our guides on air balancing and duct installation explain how to avoid it.
Cassette units sit flush in a false ceiling and blow air in several directions. They are common in offices, shops, restaurants and larger living spaces. They save wall space and spread air evenly in an open area.
Plan cassette positions with lights, sprinklers and detectors so that services do not clash.
Package units combine the evaporator, compressor and condenser in one cabinet, and are often placed on roofs or at ground level, with ducts into the building. They suit shops, warehouses and some commercial buildings. They are strong, but need access for service and structural support.
In dusty, hot areas, the coil and filter need frequent cleaning. For industrial sites, plan service access and consider spare parts availability.
AC capacity must match the heat load. The load depends on the room size, ceiling height, glass area, sun direction, insulation, number of people, lights and equipment. An undersized unit runs constantly and never catches up. An oversized unit cools quickly, then switches off before it removes humidity, leaving the room clammy and often cycling on and off.
Ask the installer to base the size on a load estimate, not on a rule of thumb alone. The US Department of Energy notes that correct sizing and installation are important for efficient air conditioning.
Indoor units should sit where air can reach the whole room without blowing directly on seating or beds. Avoid placing them behind curtains or furniture. Outdoor units need clear space for airflow, protection from direct blockage and easy access for servicing. Rooftop or balcony positions should allow safe access.
Many buildings have rules on where outdoor units can go, how pipes can run on facades and which contractors can work. Landlords may need to approve changes. Check with your building management and the relevant authority such as the Abu Dhabi Department of Municipalities and Transport if structural or external changes are involved.
Ask the installer to confirm that the work will follow building rules, and to handle any paperwork they are responsible for.
Shortcuts such as skipping the vacuum or using long, kinked pipes lead to leaks and poor performance later.
Running costs depend on the unit, its size, how you use it and how well it is installed. Units with better efficiency ratings can use less energy, but only if they are sized and installed correctly. Think about the total cost of ownership: purchase, installation, servicing and energy.
Our AC installation page explains how we survey, quote and install, and what warranty applies.
Noise and appearance matter more than many people expect. A wall mounted split in a bedroom needs a quiet indoor unit and a position away from the head of the bed. A ducted system is quiet in the room but may carry fan noise through ducts if they are poorly designed. Cassette units are neat in a ceiling, but the airflow pattern must suit the room layout.
Ask to see the noise rating of the indoor unit and think about how the room is used. A home office, a nursery and a living room have different needs.
The cost of an AC project includes the equipment, installation, pipes, cables, ducts, drains, electrical work, permits and later servicing. Ducted systems usually cost more to design and install than a set of splits, but can look tidier and cool a large area evenly. Cassette systems cost more than wall splits but suit open spaces. Running cost depends on the efficiency, the size and how the system is used.
Compare options over several years, not just on the first price. A well designed system that is easy to service often costs less over its life than a cheap system that is awkward to maintain.
Many properties use more than one type. A villa may have a ducted unit for the ground floor, splits for bedrooms and a separate unit for a majlis. An office may have cassettes in open areas and splits in meeting rooms. Mixing types lets you match each space, but complicates servicing. Keep a list of units and their types and plan a service schedule that covers all of them.
Good preparation shortens the installation and avoids last minute changes that raise the cost.
After installation, the installer should test cooling, check drainage, measure electrical readings and explain the controls. Keep the manuals, warranty documents and the installer's contact details. Register the warranty if required. Note the date and the refrigerant type. Book the first service before the warranty conditions require it, and ask the installer for advice on filter cleaning in your first weeks.
These are starting points. A survey will adjust them for sun, insulation and how you use the space.
Controls make a big difference to comfort and cost. Ducted systems can have zone dampers that let you cool only the rooms in use. Splits give individual control by design. Smart thermostats and timers help avoid running units in empty rooms. Ask the installer what control options are available and how they work in daily use. Controls that are too complicated tend to be ignored, so choose a system you will actually use.
A careful survey and a clear scope avoid most of these. Ask the installer to explain how each point will be handled.
Put quotes side by side and tick each line. Missing items are where hidden costs live.
Measure the rooms, note the ceiling height and the sun direction, and take photos of the proposed indoor and outdoor positions. Share them with the installer before the survey. A prepared customer gets a faster, more accurate quote and a smoother installation.
A new unit still needs regular care. Wash filters monthly in the hot season, keep the outdoor unit clear and book a yearly service. Good installation and good maintenance together give the best comfort and the longest life from the equipment.
Ask what type and size the installer recommends and why, what pipes and cables will be used, how the drain will be routed, who handles permits and what the warranty covers. Compare quotes line by line. To book a site survey, call ALHUD Technical LLC on +971 56 210 8748.
Many villas use a mix of ducted or central systems for large areas and splits for individual rooms. A technician can size and propose the right mix.
A cassette unit is installed in the ceiling with air blowing from four sides or fewer. It suits offices, shops and rooms with false ceilings.
No. An oversized unit can short cycle, cool unevenly and handle humidity poorly. Correct sizing matters.
Rules depend on the building. Check with your landlord, building management and the relevant authority before changing units or outdoor positions.
A single split can often be done within a day, while ducted and cassette systems take longer. The installer can estimate after a survey.
Need help? Call or message ALHUD Technical LLC on +971 56 210 8748. We will arrange a visit and confirm the scope and price before work starts.
Serving all Abu Dhabi areas, same-day appointments available