Most AC water leaks inside come from a blocked drain line, a dirty filter or coil, a frozen coil that melts, a poor installation slope or a cracked drain pan. Switch the unit off, catch the water and book a technician to clear the drain and find the cause.
Every air conditioner removes moisture from the air as it cools it. That water collects on the coil, drips into a pan and leaves through a drain line. In humid Abu Dhabi summers, an AC can produce a lot of water. A leak means that normal path is blocked or broken, not that the AC is making too much water for no reason.
Most leaks come from a few causes, and a technician can find which one applies.
Do not keep running a unit that is dripping heavily, since the water can damage ceilings, walls and electrical fittings.
A drain line can clog with dust, slime and debris over time. Water then backs up in the pan and spills out. Clearing the line and cleaning the pan usually fixes the leak, and regular maintenance helps prevent a repeat. Our AC maintenance service includes checking drain lines and pans.
If the coil freezes, the ice melts and floods the pan. This often points to weak airflow or low refrigerant. Cleaning the filter helps, but repeated freezing needs a technician to check the coil, fan and refrigerant, and to repair any leak before refilling.
An indoor unit that is not level, or a drain pipe without enough slope, can leak even when the unit is clean. This often shows up on newly installed or moved units. A technician can adjust the level and re run the drain line where needed.
This helps the technician bring the right tools and find the cause on the first visit.
Split units usually leak from the indoor wall unit or the drain pipe. Cassette units sit in the ceiling and often use a condensate pump, so a pump fault can cause leaks. Ducted units drain from the air handler, and a blocked trap or pan can send water into the ceiling. The fix depends on the type, which is why a short description or photo helps.
Wet walls and ceilings can lead to mould if left damp. The EPA advises drying wet materials quickly and fixing the moisture source, and also notes that indoor moisture control supports healthier indoor air. Prevent leaks by cleaning filters, booking yearly servicing and reporting drips early.
Water near electrical parts and walls can be a safety and damage risk. Switch the unit off and keep the area dry until it is checked.
A blocked drain line, a dirty filter or coil, or an unlevel unit are common reasons. A technician can find which applies.
You can clean the filter and wipe visible areas, but clearing drain lines and checking the unit are best left to a technician.
High humidity produces more condensation, which exposes drain blockages or slope problems that stay hidden in cooler months.
Persistent moisture can encourage mould on walls, ceilings and insulation. Dry the area and fix the source quickly.
Need help? Call or message ALHUD Technical LLC on +971 56 210 8748. We will arrange a visit and confirm the scope and price before work starts.
Serving all Abu Dhabi areas, same-day appointments available